Join our mailing list!






Home > Chargers > Charger Accessories
This category of charger accessories includes all those items you may need in radio control electric flight to charge and maintain your LiPo, LiFe, A123, NiMh, NiCd, and Pb batteries. Here you'll find charge harness for your type of power plugs like Deans Ultra, XT60, XT90, EC3, EC5, Anderson PowerPoles and more. We also carry paraboards for parallel charging several packs at once on a single output charger.
Sort By:
Page of 2
Charge Harness for Anderson Power Poles Charge Harness for Banana Plugs Charge Harness for Deans-
Our Price: $5.95
In Stock
Our Price: $4.95
In Stock
Our Price: $5.95
In Stock
Charge Harness for Anderson Power Poles Charge Harness for Banana Plugs Charge Harness for Deans-
Banana plugs on one end with Anderson Power Pole connectors on the other end.
Banana plugs on one end with banana connectors on the other end. Sometimes you just need a jumper set.
Charge harness with banana plugs one on end and a male Deans Ultra plug on the other.
Charge Harness for EC3 Charge Harness for Futaba Rx Charge Harness for Futaba Rx/Tx
Our Price: $3.95
In Stock
Our Price: $4.95
In Stock
Our Price: $7.95
In Stock
Charge Harness for EC3 Charge Harness for Futaba Rx Charge Harness for Futaba Rx/Tx
Charge harness with banana plugs one on end and a male EC3 plug on the other.
Banana plugs on one end with Futaba-style receiver battery connector on the other end. Use this harness to charger your receiver batteries.
Banana plugs on one end with Futaba-style receiver and transmitter connectors on the other end.
Charge Harness for Hitec Rx/Tx Charge Harness for Hitec/JR Rx Charge Harness for JR/Spektrum Rx/Tx
Our Price: $7.95
In Stock
Our Price: $4.95
In Stock
Our Price: $7.95
In Stock
Charge Harness for Hitec Rx/Tx Charge Harness for Hitec/JR Rx Charge Harness for JR/Spektrum Rx/Tx
Banana plugs on one end with Futaba-style receiver and transmitter connectors on the other end. Use these two charge harnesses to charge your Hitec transmitter and receiver batteries.
Banana plugs on one end with Hitec/JR-style receiver battery connector on the other end. Use this harness to charge your receiver battery.
Banana plugs on one end with JR-style receiver and transmitter connectors on the other end. Use these two charge harnesses to charge your JR transmitter and receiver batteries.
Charge Harness for JST/BEC Charge Harness for Tamiya Plugs Charge Harness for Transmitters
Our Price: $4.95
In Stock
Our Price: $3.95
In Stock
Our Price: $5.95
In Stock
Charge Harness for JST/BEC Charge Harness for Tamiya Plugs Charge Harness for Transmitters
Charge Harness for BEC or JST connectors. Has banana plugs on one end and a JST connector on the other.
Charge Harness for TAMIYA Plug. May be used with Hyperion CLASSIC Car Packs, or any pack which has a standard Tamiya connector
Universal charge harness for most transmitters. Has banana plugs on one end and 3 different transmitter charger jack plugs on the other.
Charge Harness for XT60 eFuel Fuse Protected Power Strip Hyperion 6-Port Charge Adapter for MCPX Packs
Our Price: $7.49
In Stock
List Price: $19.95
Our Price: $14.95
Sale Price: $14.95
Savings: $5.00
In Stock
Our Price: $8.95
In Stock
Charge Harness for XT60 eFuel Fuse Protected Power Strip Hyperion 6-Port Charge Adapter for MCPX Packs
Banana plugs on one end with an XT60 connector on the other end to match your batteries.
This is a new version of eFuel 40A power strip with 1A USB output. This item can be connected to a DC power supply to distribute power for multiple chargers and a USB electronics.

This parallel charge board allows you to charge up to 6 lipos with MCPX connectors at a time which saves you charging time.
Hyperion 6-Port Parallel Charge Adapter for 1S Lipo Hyperion Charge Harness for 2S Car Packs Hyperion Charger Output Wire Set with Banana Plugs
Our Price: $7.95
In Stock
Our Price: $6.95
In Stock
Our Price: $3.95
In Stock
Hyperion 6-Port Parallel Charge Adapter for 1S Lipo Hyperion Charge Harness for 2S Car Packs Hyperion Charger Output Wire Set with Banana Plugs
Six-port parallel charge adapter for 1S LiPo Fits compatible battery brands such as the Hyperion CX130-UM. Includes gold 4mm connectors to charger output. EOS Output Harness for Balance Charging 2S Car Packs such as ORION, TRAKPOWER and CHECKPOINT. Fits EOS balance chargers EOS0403i, 0606i-x, 0610i-x) and LBA10 balancer. Output wire set for chargers that have 4mm output sockets, like all Hyperion chargers and most other high-quality chargers on the market. Made of 14awg wire 20cm in length with 4mm gold plated bullets on one end and bare tinned leads on the other - ready for the power connector of your choice.
Hyperion EOS Connect WiFi Module Hyperion EOS Sentry V3 Battery Checker with Balancing and Store Mode Hyperion Harness for 0606i Chargers
Our Price: $24.95
In Stock
Our Price: $22.95
In Stock
Our Price: $2.95
In Stock
Hyperion EOS Connect WiFi Module Hyperion EOS Sentry V3 Battery Checker with Balancing and Store Mode Hyperion Harness for 0606i Chargers
This WiFi module allows you to change your charger settings all from a convenient APP. Just download the APP from online, connect the Charger to the EOS Wifi Module and you are ready to charge!
Hyperion's best selling battery checker is now a version 3 which supports HvLi batteries as well as standard LiPo, NiMh, and NiCd batteries. The new V3 also supports 1-8 cell batteries, balances your packs, and even has a storage mode.
Harness to fit between HP-TI-PRGUSB USB-to-Serial Adapter and EOS0606i Series Chargers, for PC Connections.
Hyperion Harness for 0610i Chargers Hyperion LBA10 Balancer Dataport Cable Hyperion LBA10 Net Cable/Adapter Set
Our Price: $1.95
In Stock
Our Price: $2.95
In Stock
Our Price: $3.95
In Stock
Hyperion Harness for 0610i Chargers Hyperion LBA10 Balancer Dataport Cable Hyperion LBA10 Net Cable/Adapter Set
Harness to fit between HP-TI-PRGUSB USB-to-Serial Adapter and EOS0606i Series Chargers, for PC Connections. DataPort Cable for connecting LBA10 Balancer to compatible Hyperion Chargers, in order to view individual cell voltages during the charge process
Set for Networking two LBA10 Balancers together, for balance charging two packs as one 7S to 12S pack. Includes Network Cable (for NET PORT) and one 4mm Female-Female adapter to serial-connect LBA10 Input leads together.
Hyperion Multi Adapter Extension for 2-6S Hyperion Multi Adapter Extension for 2-7S 720i Hyperion Multi-Harness for 2S to 6S - FMA/Cellpro
Our Price: $2.95
In Stock
Our Price: $2.95
In Stock
Our Price: $5.49
In Stock
Hyperion Multi Adapter Extension for 2-6S Hyperion Multi Adapter Extension for 2-7S 720i Hyperion Multi-Harness for 2S to 6S - FMA/Cellpro
Harnesses to fit between Hyperion Multi-Adapters and Hyperion EOS 6S balancing chargers Harnesses to fit between Hyperion EOS 7S chargers and the balance boards.
Multi-Adapter Balancer Harnesses for EOS Hyperion Balance Chargers that charge 1S to 6S Lipos
Hyperion Multi-Harness for 2S to 6S - HP Hyperion Multi-Harness for 2S to 6S - TP Hyperion Multi-Harness for 2S to 6S - XH
Our Price: $4.95
In Stock
Our Price: $4.95
In Stock
Our Price: $4.95
In Stock
Hyperion Multi-Harness for 2S to 6S - HP Hyperion Multi-Harness for 2S to 6S - TP Hyperion Multi-Harness for 2S to 6S - XH
Multi-Adapter Balancer Harnesses for EOS Hyperion Balance Chargers that charge 1S to 6S Lipos Multi-Adapter Balancer Harnesses for EOS Hyperion Balance Chargers that charge 1S to 6S Lipos Multi-Adapter Balancer Harnesses for EOS Hyperion Balance Chargers that charge 1S to 6S Lipos
   
 
Sign Up For Our Newsletter