Hyperion EOS 0615i 6S Duo III Balancing Charger

SUPER POWER - DUAL CONVENIENCE

Hyperion is already known as a world-wide leader in advanced battery chargers, and we continue to push development forward.  The newest 0615i DUO3 charger provides a wide feature set, and unmatched power to suit 5C-chargeable batteries like our new G3 Lipo.  With built-in USB port and supplied cable, you'll be able to install new firmware updates for added features and performance, as they become available.

EOS 0615i DUO3 DC INPUT 11V~28V
6S Max, 180W, 15A Max Charge Per Port , 50W+50W 10A Discharge
SYNC Charge up to 2x6S for max 12S Flightpacks at 360W max. See explanation of SYNC MODE charging below.

DUO3 Changes vs. Previous DUO2:
* 12-Bit Balance Circuit Resolution for superb accuracy
* Built-In USB DataPort and supplied USB cable
* Hardware support for PC Control & Logging Software
(Bi-Direction release before Dec 2009. Logging available now.)
* 20 Memory slots for batteries per port (40 total)
* CYCLE mode for LiFePO4 and LiPo
* Max Current per port raised from 10A to 15A

Specifications & Features:

• 180W Per Port for 360 Watts Max CHARGE Output
• 0.1A to 15.0A max CHARGE Current in 0.1A steps (subject to 180W/port limit with 14.5V+ DC PS)
• 50W Per Port DISCHARGE with 10A Max Current
• STORE MODE allows fast and simple charge/discharge to ~60% capacity for proper storage of Lithium Batteries = longer battery life.
• Charges/Discharges 1 to 6 cells Lithium Polymer Batteries Per Port (3.7V/cell nominal types)
• Charges/Discharges 1 to 6 cells Lithium Ion Batteries Per Port (3.6V/cell nominal types)
• Charges/Discharges 1 to 6 LiFePO4 (A123) cells (3.3V/cell nominal types)
• Charges/Discharges/Cycles 1-16 cell NiCd/Ni-MH in three modes: Normal, Linear, and Automatic
• Charges/Discharges 1~12 cell Lead Acid Batteries (Pb, 2V/cell)
• Allows Lithium-Type batteries to 50,000mAh and PB (lead/acid) batteries to 100Ah capacity
• Two built -in Hyperion LBA10/300 Balancers with 10A max rating and 300mA max balance rate/cell
• 12-bit Resolution Balance Circuits for max accuracy
• TCS - Terminal Capacity Selection
• Rich Data Displays during and after charging and balancing
• USB PC Port for Data Logging, Firmware upgrades, and future PC Control Software System (Sept1~Nov1 2009)
• Temperature Sensor Ports & Temp Stop settings*
• Wide Voltage Input Range 11v~28v for higher efficiency when charging high-voltage packs, and compatibility with a wider selection of AC/DC power supplies
• Power Supply Amperage Control to allow reliable charging with lower-output power supplies
• Power Supply Voltage Control (PS Load Control) works in concert with Amperage control to insure the charger does not overload your variable power supply
• Adjustable Power Sharing % between Outputs
• Input Cable with 4mm Male Connectors + Clamps
• Output Cable Set Included, with 4mm Connectors
• Two, Integral, Thermostat-Controlled Cooling Fans
• 2-Line, 16-Character, Yellow Backlit LCD Data Display. Highly visible in all conditions
• 20 User-definable Memory Positions per port (40 total)

* Temp sensors available separately: EOS1210i-SEN   ** Firmware upgrades only available if/when improvements are identified in future.

The Hyperion Duo 3 now comes with 2 HP and 2 XH style 2-6S Multi-Adapters

CLICK HERE for Hyperion Balancing Charger Support Page

Click Here for 2-6 cell multi-adapters for your brand of batteries.

Hyperion EOS 0615i 6S Duo III Balancing Charger

PRICE:

$249.95