Hyperion EOS 720i Net 3 7S 20A 250watt Balancing Charger

Hyperion EOS 0720i NET3 7S 16N CHARGER, with Integrated LBA10A balancer, TCS, and 250W charger power.  Network to 500W and 14S max (2x7S balanced) - See Details!

The EOS 0720i NET is an extremely powerful (250W, 20A), versatile, easy-to-use charger with special features for speed charging lithium packs up to 7S*. 2C rates are possible even with our largest 7S packs. Integrated LBA10+ balancer has 300mA balance power per cell. Terminal Capacity Selection, PS Load Control, PC Dataport (PC software coming soon!), and User-Upgradable firmware round out this fantasitic package. But don't stop there: *two of these chargers can be Networked to allow charging two similar packs as a single unit, up to 14S total at 500W charge power. Nothing else on the planet offers so much power for so few $$ out of your pocket. Output Charge Cord/Connector set and Hyperion Balance Multi-Adapter for 2S to 7S packs are included.

Specifications & Features:

• 12-bit Resolution for max accuracy
• 250W max CHARGE Output
• 0.1A to 20.0A max Charge Current in 0.1A steps (constrained by 250W max with 14.5V+ DC Input)
• 80W/10A max DISCHARGE limits
• STORE MODE allows fast and simple discharge to ~60% capacity for proper storage of Lithium Battery types = longer battery life.
• Charges/Discharges 1 to 7 cells Lithium Polymer Batteries Per Port (3.7V/cell nominal types)
• Charges/Discharges 1 to 7 cells Lithium Ion Batteries Per Port (3.6V/cell nominal types)
• Charges/Discharges 1 to 7 LiFePO4 (A123) cells (LiFePO4 3.3V/cell nominal, A123 3.3v support)
• Charges/Discharges/Cycles 1-16 cell NiCd/Ni-MH in three modes: Normal, Linear, and Automatic
• Charges/Discharges 1~12 cell Lead Acid Batteries (Pb, 2V/cell)
• Allows Lithium-Type batteries to 50,000mAh and PB (lead/acid) batteries to 100Ah capacity
• Built-in Hyperion LBA10 Balancer with 300mA max balance rate/cell and new 12-Bit measurement resolution
• TCS - Terminal Capacity Selection
• Rich Data Displays during and after charging and balancing
• USB PC Port for Data Logging, Firmware upgrades, and future Charger Control Software System (Nov1~Dec1 2009)
• Temperature Sensor Ports & Temp Stop settings*
• Wide Voltage Input Range 11v~28v for higher efficiency when charging high-voltage packs, and compatibility with a wider selection of AC/DC power supplies
• Power Supply Amperage Control to allow reliable charging with lower-output power supplies
• Power Supply Voltage Control (PS Load Control) works in concert with Amperage control to insure the charger does not overload your power supply
• Input Cable with 4mm Male Connectors + Clamps
• Output Cable Set Included, with 4mm Connectors
• Integral, Thermostat-Controlled Cooling Fans
• Rugged Aluminum Case with Insulating End Caps
• 2-Line, 16-Character, Yellow Backlit LCD Data Display. Highly visible in all conditions
• 20 User-definable Memory Positions
• Firmware upgradable via Win PC**. USB Cable included.

EOS0720iNET3 is designed to charge single Lithium-based packs up to 7S max. For flight packs larger than 7S, Network two NET3 in SYNC MODE to balance charge two separate packs, which after charge are series-wired to make the flight pack. (so 2x2S=4S up to 2x7S=14S series flight packs are possible)

The Hyperion NET 3 now comes with the HP and XH style 2-6S Multi-Adapters

CLICK HERE TO SEE DATASHEET

CLICK HERE to see user's manual and full details

Click Here for 2-7 cell multi-adapters for your brand of batteries.

Hyperion EOS 720i Net3 7S 20A Balancing Charger

PRICE:

$149.95