Dionysus Design Dual Adjustable Servo Rate Reducer

This Dual Adjustable Servo Rate Reducer has the ability to indepenantly slow down two servos. A small potentiometer (POT) allows the servo end to end speed to be adjusted from less than 1 second to 5 seconds. The POT also allows selection of the failsafe signal. When the rate reducer recieves 10 bad signals in a row, it will default to failsafe mode and slowly move the servo to the failsafe position. This is especially important for landing gear and flaps to default in the down position, or IC engines to default in the idle position!

One or both channels can be used at any time.

The POT is adjusted in the following manner: The center is the fastes servo speed. Turning the POT to the left or right will slow down the servo. Turning the POT to the left will enable the failsafe signal to be 1.0ms. Turning the POT to the right will enable the failsafe signal to be 2.0ms.

Stats