image image RC Dude Hobbies Home

                       Service |  Policies |  About Us |  Your Account  | Sign In imageLost your password? | Registerimage

Categories

*Closeout Sale Items

Accessories
    Adhesives
    Aerial Photography
    Dimension Engineering
    Dionysus
    DuBro
    Gadgets
    Magnets
    Miscellaneous
    Soldering
    Tools
    Velcro & Straps

BECs and Regulators

Batteries
    Battery Tools
    Hyperion 25C G3 CX
    Hyperion 35C G3 VX
    Hyperion 45C G3 EX
    Hyperion LiFe Tx/Rx

Brushless Controllers
    Castle Creations
    Cobra Airplane ESCs
    Cobra MultiRotor ESCs
    HobbyWing ESCs
    iFlight Multi-Rotor ESCs
    Multi-Rotor ESCs
    Next Level MultiRotor
    Scorpion Air/Heli ESCs

Brushless Motors
    Cobra 22mm Series
    Cobra 28mm Series
    Cobra 35mm Series
    Cobra 41mm Series
    Cobra MultiRotor Series
    Cobra Parts
    Himax Motors
    Hyperion Motors
    iFlight MultiRotor Motors
    Scorpion 22mm
    Scorpion 30mm
    Scorpion Indoor
    Scorpion Parts
    Suppo Motors

Cameras and Gimbals

Chargers

Connectors & Cables
    Balance Plug Converters
    Balance Plugs
    Battery Connectors
    Bullet Connectors
    Charger Accessories
    Heat Shrink
    ParaBoards
    Servo Extensions
    Switches
    Wire

Dragon Link LRS

Flight Controllers

Lights

Made in USA
    APC Propellers
    Castle Creations
    Dimension Engineering
    Dionysus Design
    DuBro
    HoverThings Multi-Rotors
    Miscellaneous
    Next Level Multi-Rotors

Motor Mounts

Multi-Rotor Aircraft
    ARF and RTF
    Camera Mounts
    DJI Multi-Rotors
    Flight Controllers
    HoverThings
    Landing Gear
    Multi-Rotor Accessories
    Multi-Rotor ESCs
    Multi-Rotor Frames
    Multi-Rotor Motors
    Next Level
    Phoenix Flight Gear
    Props - APC
    Props - DJI Hub
    Props - GemFan
    Props - Maytech
    QuadFrame

Pinion Gears

Prop Adapters

Propellers
    APC Electric Pusher
    APC Folding Blades
    APC Multirotor Props
    APC Slo Props
    APC Thin Electric
    GemFan Multi-Rotor
    GemFan Wood Props
    Graupner Folding Blades
    GWS 3-Blade Props
    GWS HD & DD Props
    GWS Slow Props
    Maytech Carbon Fiber
    MPI Folding Blades
    Multi-Rotor Props
    Xoar Beechwood

Servos
    Hitec Analog
    Hyperion Digital
    Servo Accessories
    Servo Extensions

Spinners

Swag

Wheels & Floats



Advanced Search

View Cart 

Checkout 

 Wish List

Items in your cart

Empty

Amount in Cart: $0.00

image

DJI Naza-M V2 Flight Controller

New case design with CANBUS port.  Enhanced BEC functionality, better heat dissipation. Extra CANBUS ports, enhances the expandability of the system and will support Gopro Zenmuse, iOSD and Bluetooth module for assistant software use on smart phones in the future, etc.  NAZA V1 can also be upgraded using PMU V2 and support Gopro Zenmuse, iOSD and Bluetooth module.

What’s new with the NAZAM V2 :

  • New attitude stabilization algorithm, provides better flight performance / maneuverability
  • New flight control performance, provides better flight experience; (flight control is smoother, take‐off is easier)
  • Support for Octo‐rotor
  • One‐motor stopped still can land safely (Hexa‐rotor, Octo‐rotor)
  • Automatic course deviation compensation, reduced the effects of magnetic disturbance; interference around the compass detection & warning
  • Added IMU advanced calibration, error identification and warning, reduced the impact of sensor error to the flight performance.

 

All-in-one Design

DJI adheres to continuous innovation and improvement. With the new firmware, new attitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude and attitude and therefore can be used for autopilot/automatic control.

 
 
   
Independent PMU with amazing function extension

The Naza PMU V2 has enhanced BEC functionality and provides extendable CAN BUS ports, which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is also included for optional Bluetooth LED module to allow parameter adjustment via a mobile APP (future firmware upgrade required for this functionality)

 

   
Advanced & Improved Attitude Stabilization Algorithm

The latest fourth generation attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability even without the GPS module. It is more flexible and stable, and gives the hobbyists a wonderful flight experience. New features have been included such as GPS course automatic compensation, GPS & Compass sensor calibration, new take-off mode and so on.

 

   
Nine Types of Multi-rotors Supported

Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts.
Quad I, Quad X;
Hexa I, Hexa V, Hexa Y, Hexa IY;
Octo X, Octo I, Octo V; ( Naza-M V2 does not support the aircraft which has large vibration, so when you choose to use hexa-rotor or octo-rotor, please use the vibration dampening devices accordingly.

 

   
Multiple Flight Control Modes/Intelligent Switching

It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger.

 

   
GPS Module Available/Accurate Position Hold

The plug and play GPS module will greatly enhance the performance for Aerial Photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.

 

   

Intelligent Orientation Control

Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:
In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 1):

In home lock flying, the forward direction is the same as the direction from home point to multi-rotor. See the following figures (Mode 2):

 

   
Enhanced Failsafe Mode

If your transmitter supports failsafe, then you can set failsafe through port-U. Naza controller has built-in auto level failsafe function, which means when the communication between MC and the transmitter is disconnected, the outputs of all command sticks from controller will go to center position. If the GPS module is used, you can also set RTH on failsafe. If your transmitter has only 4 channels, then MC will work in Atti. Mode by default without the failsafe function.

 

   
Two Levels of Low Voltage Protections

In order to prevent your multi-rotor from crashing or other harmful consequences caused by low battery voltage, we have designed two levels of low voltage protection. You can choose not to use this, however we strongly recommend you to enable the protection. Both levels of protection have LED warning as default. The first level will blink the red light continuously; the second level will blink red light continuously and the multi-rotor will descend and land. In manual mode when low voltage protection is triggered the LED warning will be active only.

 

   
Motor Arm and Motor Dis-arm

There are four ways to start the motors, see the following picture:

When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors.

Motor Disarm: There are two modes of Motor Disarm: namely Intelligent Mode and Immediate Mode. For more information, please refer to the user manual or DJI Wiki.

Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience in supporting double spring TX; every time you let go of the throttle stick it will hover.

 

   
PPM, S-BUS & Ordinary Receiver Supported

Minimum Four channel receiver supported, also PPM and Futaba S-Bus receiver supported. PPM & S-Bus receivers (the general use of the first 8 channels of S-Bus receiver) to optimize the channel connection, the A, E, T, R, U five-channel functions are set using channel X2, use only one servo cable to connect the PPM or S-Bus to X2, this makes installation quick and easy.

 

   
Independent LED Module

The Independent LED module makes the indication of the flight status and the system status to the ground much clearer. The pilot can get information more quickly and more conveniently, even at night, he/she can get real-time flight information feedback through the LED flashing frequency and colour. In addition, the module has a USB interface, which is used for parameter settings and firmware upgrade.

 

   
Built-in Gimbal Stabilization Function

The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the aircraft after setting the parameters the first time.

 

   
Multi-rotor One-power Output Fail Protection

In most conditions, the whole multi-rotor will retain good attitude and rotate around the frame arm with no power output, due to imbalanced mechanical structure and external environment. Rotating is mainly caused by payload and external environment. When payload is heavier, rotating speed is faster. On rotating, the hexa-rotor physical structure can cause rudder to become out of control. This humanistic protection function from Naza-M V2, in Attitude or GPS Mode, keeps attitude under control even with any one power output failed and highly reduces crash risk.

 

   
Remote Gain Adjustment

The default parameter settings are preset for you to achieve a normal flight, and also supports remote parameter adjustment by using a control slider on the TX during flight in order to obtain better performance.

 

   
New Assistant Software & Firmware Online Update

The user interface of the assistant software has been comprehensively updated and brings you a new interaction experience. Instructions will automatically appear which is very convenient. In addition, on the left side of each menu section there is additional information. The logical design makes your parameter settings more simple and convenient. Like other DJI products the Naza-M V2 firmware can be upgraded free online.

 


 

  

This Naza-M V2 Set Includes:

  • Naza-M V2 Flight Controller
  • Power Management Module
  • LED with USB/Bluetooth
  • Cables

Click here for the DJI Naza V2 Support Page


DJI Naza-M V2 Flight Controller

SKU: DJI-NZMV2MC

PRICE:  $259.00

Status: In Stock

Quantity:

E-mail a friend about this item.

Return to Catalog


 

Advanced Search  | View Cart  | Checkout  | About Us  | Service  | Policies  | Home

 
 
E-commerce powered by ProStores
Copyright © 2014 RC Dude Hobbies . All Rights Reserved.