GWS Slow Stick with 400C Power System - Red

Features:

• Motor and gearbox with preinstalled plastic mount
• Foam wing and tail sections with fiberglass fuselage tube
• Wings: One piece, foam construction
• Radio Component Placement: Servos, battery and ESC mount on fuse tube
• Landing Gear: Main, 2mm diameter prebent wire, tail, 1mm diameter prebent wire
• Wheels: Two 2.9" (75mm) diameter main, 1" (25mm) tail wheel, plastic ultra lightweight design

Includes:

Foam wing and tail sections, 2mm diameter wire main landing gear, 1mm diameter tail gear, three ultra light wheels, EPS-400C motor system, EP-1060 prop decals, epoxy, rubber bands, fuselage tube, hardware and instruction manual

Requires:

• Motor - Brushless outrunner or brushless inrunner/gearbox, brushed motor/gearbox
• Speed Control: ICS400/F, or 8A equivalent
• Battery: AA 8.4-9.6V 750mAh NiMH OR 7.4-11.1V 2S1P OR 3S1P 1300-2200 LiPo
• Charger: Timed or peak for type of battery selected
• Radio: 3-4 channel with two micro servos  (1-elevator, 1-rudder)
• Building and field equipment

Specs:

• Wingspan: 46.3" (1176mm)
• Wing Area: 505.9 sq in (32.64 sq dm)
• Weight: 15.87 - 21.16 oz (450 - 600 g)
• Wing Loading: 4.5 - 6.0 oz/sq.ft (13.8 - 18.4 g/sq.dm)
• Length: 37.6" (954mm)
• Airfoil: Flat bottom, high wing placement
• Center of Gravity: 3.7-4.1" (95-105mm) behind leading edge of wing
• Control Throws - Elevator: Up & Down 15-20° Rudder: Right & Left 25-35°

Using the Slow Stick for Aerial Photography?

Check out the Askman AP products available for the Slow Stick

GWS Slow Stick with EPS-400C - RED

PRICE:

$29.95

E-mail a friend about this item.

Send Page To a Friend

Return to Catalog