MOTOR MOUNT for Hyperion Z40 Series, or any other motor/gearbox with 25mm mounting pattern. Intended for Hyperion Z40 Series motors, the mount has two sets of motor mounting holes with 25mm spacing. The holes are M4 to match Z40 and other large motors, so if mounting a motor with M3 screws we recommend using countersunk-head screws to maintain proper centering. Total weight of the mount with all hardware is 130g. Adjustable for lengths from 85mm~135mm. Includes: 1) Front Plate, 2) Side Plates, 8) M4 x 12mm Allen-Head Screws, 8) Nyloc M4 Nuts, 4) M4 x 20mm Allen-Head Screws, 4) M4 Blind Nuts Hyperion