|
Accessories:Tools
|
|
Anderson PowerPole Crimper
This crimper tool is custome designed for Anderson PowerPole connectors. There are 3 crimping dies for 15A, 30A, and 45A contacts and it features a ratcheting mechanism for a professional result every time. Crimping forms a compression weld with lower resistance and higher reliability.
In Stock -
Price: $39.95
|
|
CellLog 8M Battery Monitor
CellLog is a multifuctional highly precise voltage meter. It tells you not only the voltage of individual cells in the mV range, but also the total voltage of a battery pack, the highest and lowest voltage, and voltage difference between cells. Various alarms can also be setup with this little handy gadget.
In Stock -
Price: $18.95
|
| |
|
|
CellLog 8S Battery Monitor & Data Recorder
CellLog is a multifuctional highly precise voltage meter. It tells you not only the voltage of individual cells in the mV range, but also the total voltage of a battery pack, the highest and lowest voltage, and voltage difference between cells. Various alarms can also be setup with this little handy gadget. This 8S version can also be used as a voltage data recorder in your RC model.
In Stock -
Price: $34.95
|
|
Crimper for Servo Extensions
Crimper tool for servo extensions and other similar connectors.
In Stock -
Price: $17.95
|
| |
|
Curved Lexan Scissors
Stainless stell curved scissors for cutting ABS cowls, plastic canopies, Lexan car and helicopter bodies.
In Stock -
Price: $4.95
|
|
Flux Dispenser Bottle
Self standing, no spill, polyethylene squeeze bottle dispenses one drop of liquid flux, oil or solvent through stainless steel hypodermic needle. Bottle holds 2 oz. of liquid and three needle sizes are included
In Stock -
Price: $4.95
|
| |
|
Folding Magnifier with 4.5-inch Lens and LED Light
2X Magnification with a 4.5" glass lense and a 3-LED light that requires 3 AAA batteries (not included). Built in ruler and folds for easy storage when not in use.
In Stock -
Price: $9.95
|
|
GT Power Tachometer
The GT Power tachometer will measure the RPM of props with up to 9 blades. It will hold the peak RPM value and features a sharp backlit LCD screen.
In Stock -
Price: $18.95
|
| |
|
GT Power Wattmeter
Everyone that flies electric should have a wattmeter so you can measure exactly how your power system is performing and to make sure you are keeping everything below the max ratings. This wattmeter will measure from 0 to 60v and up to 130A.
In Stock -
Price: $29.95
|
|
Heat Gun for Covering and Heat Shrink.
Lightweight heat resistant plastic construction. features variable airflow, two temperature ranges, auto cutoff, and multipurpose nozzle.
Out of Stock - Price: $24.95
|
| |
|
Heat Gun Heavy Duty - 1500 watts
Two temperature settings (572/1112) for a wide variety of jobs from applying shrink wrap to stripping paint and varnish. This is serious power great for heatshrink and other applications that need high heat.
Out of Stock - Price: $19.95
|
|
Helping Hand with Magnifier
Sometimes 2 human hands just aren't enough. This is really cool for holding everything while you solder or glue.
In Stock -
Price: $4.95
|
| |
|
Helping Hand2 with Magnifier and LED Light
This is our Best Seller Helping Hand with a Larger 2X Magnifying Glass Lens With LED Light works off three AAA batteries ( Not Included). A Solder Iron Holder and a wide base for stabilite. A must for soldering, crafts and hobbies.
In Stock -
Price: $15.95
|
|
Hemostat - 10-inch Curved
Adaptable as ultra needle nose pliers, fuel line clamps, small vises or heat sinks, this hemostat has four locking positions to allow various degrees of clamping pressure.
In Stock -
Price: $6.95
|
| |
|
Hemostat - 10-inch Straight
Adaptable as ultra needle nose pliers, fuel line clamps, small vises or heat sinks, this hemostat has four locking positions to allow various degrees of clamping pressure.
In Stock -
Price: $6.95
|
|
Hemostat - 8-inch Curved
Adaptable as ultra needle nose pliers, fuel line clamps, small vises or heat sinks, this hemostat has four locking positions to allow various degrees of clamping pressure.
In Stock -
Price: $6.95
|
| |
|
|
Hemostat - 8-inch Straight
Adaptable as ultra needle nose pliers, fuel line clamps, small vises or heat sinks, this hemostat has four locking positions to allow various degrees of clamping pressure.
In Stock -
Price: $6.95
|
|
Hyperion Collet Puller for M5 and M6 Adapters
The easy and safe way to remove those stubborn collet adapters without damaging your motor.
In Stock -
Price: $12.95
|
| |
|
Hyperion Collet Puller for M8 Adapters
The easy and safe way to remove those stubborn collet adapters without damaging your motor.
In Stock -
Price: $14.95
|
|
Hyperion Emeter Version 2
The Emeter II is the ultimate tool for dudes that are into electric airplanes or other vehicles. The Emeter II and RDU are natural companions, and together have an astonishing array of capabilities. As such, we recommend #HP-EM2-SET with Emeter and RDU at $20 savings to you, but they are each quite powerful even separately so they available by themselves.
In Stock -
Price: $89.95
|
| |
|
Hyperion Emeter Version 2 LDU only
The Hyperion LDU (local data unit) is an inexpensive alternative to the RDU unit, for bench testing. It must be connected to the Emeter II during test runs. It has the full functionality of the RDU, except for the Height (altitude) indicator.
In Stock -
Price: $29.95
|
|
Hyperion Emeter Version 2 MDU only
The Micro Data Unit is similar to the Remote Data Unit, just smaller, and with slightly different features built-in. This is designed to work with smaller models, where the weight is of greater concern, and the full RDU is too heavy to carry.
In Stock -
Price: $39.95
|
| |
|
Hyperion Emeter Version 2 RDU only
The Emeter II RDU is the ultimate tool for dudes that are into electric airplanes or other vehicles. The Emeter II and RDU are natural companions, and together have an astonishing array of capabilities. As such, we recommend #HP-EM2-SET with Emeter and RDU at $10 savings to you, but they are each quite powerful even separately so they available by themselves.
In Stock -
Price: $79.95
|
|
Hyperion Emeter Version 2 with RDU Set
This is the ultimate gadget for dudes into electric flight. The Emeter II and RDU are natural companions, and together have an astonishing array of capabilities. As such, we recommend this combo with Emeter and RDU at $20.00 savings to you.
In Stock -
Price: $159.95
|
| |
|
Hyperion Emeter2 RDU Data Cable
This data cable comes with the Emeter itself. As such, it is mainly for replacement or as a spare. Note that it is also used to program Hyperion TITAN ESC via the Emeter II.
In Stock -
Price: $5.95
|
|
Hyperion Emeter2 RDU Temp Sensor Unit 1
This unit connects directly to the RDU "Aux" port. Temps #2 and #3 then daisy-chain to Temp #1. Therefore purchase this one first, then temps 2&3 if desired. 25cm (10") cable length means a good reach even in larger models.
In Stock -
Price: $9.95
|
| |
|
Hyperion Emeter2 RDU Temp Sensor Unit 2 and 3
The Temp#2 unit connects directly to Temp#1 unit, so Temp#1 is required to use these. Temp#3 connects to Temp#2. Temps 2 and 3 have cable length of 20cm each, so max reach of Temp#3 unit from RDU is about 65cm (~26").
In Stock -
Price: $19.95
|
|
Hyperion Emeter2 Replacement Power Cable
This power input cable comes with the Emeter itself. As such, it is mainly for replacement or as a spare.
In Stock -
Price: $3.95
|
| |
|
Hyperion Emeter2 Sandisk Memory Card 2gb
Genuine Sandisk 2 GB Memory Card. Can be used in the Emeter2 or anywhere else you need an SD card.
In Stock -
Price: $11.95
|
|
Hyperion Emeter2 Tachometer Sensor
Just attach inline on one of the three brushless motor wires and log motor rpm extremely accurately throughout the motor run. You need to know how many magnets are in your motor to configure the RDU, but even if you don't know the Emeter can be connected and RDU rpm compared with the Emeter tach. This unit is NOT plagued by the problems found in some other brands. It's rock solid!
In Stock -
Price: $9.49
|
| |
|
Hyperion EOS Sentry Battery Checker V2 with Balancing
The EOS SENTRY is a quick, convenient, easy-to-use device. It shows at a glance the remaining capacity in your battery pack, cell balance, and other information you need to get the best performance and reliability from your batteries, and avoid costly mistakes. For LiIon, LiPo, LiFePO4, NiCd, and NiMH. Now with balancing built-in!
In Stock -
Price: $26.95
|
|
Hyperion Receiver Battery Volt Monitor
Onboard Receiver Battery Volt Indicator has green yellow and red LEDS to indicate the voltage of your receiver battery or BEC.
In Stock -
Price: $14.95
|
| |
| |
