|
Brushless Motors:Scorpion Motor Parts
|
|
3x0.5x5mm Motor Mounting Screws
These M3 screws are used for mounting the Scorpion HK-22mm, HK-30mm, 22mm, 30mm, and 40mm series motors. Included in this kit are two 3x0.5x5mm socket head screws and two matching flat washers.
In Stock -
Price: $0.95
|
|
3x0.5x6mm Motor Mounting Screws
These M3 screws are used for mounting the Scorpion HK-22mm, HK-30mm, 22mm, 30mm, and 40mm series motors. Included in this kit are two 3x0.5x6mm socket head screws and two matching flat washers.
In Stock -
Price: $0.95
|
| |
|
3x0.5x8mm Motor Mounting Screws
These M3 screws are used for mounting the Scorpion HK-22mm, HK-30mm, 22mm, 30mm, and 40mm series motors. Included in this kit are two 3x0.5x8mm socket head screws and two matching flat washers.
In Stock -
Price: $0.95
|
|
Scorpion 22mm Stick Mount
Stick mount for 22mm series motors.
In Stock -
Price: $1.95
|
| |
|
Scorpion Cross Mount 22mm
The Scorpion 22mm Cross Mount is designed to fit the back of the 22mm Scorpion motors and provide a method on mounting the motor to a model's firewall.
In Stock -
Price: $1.49
|
|
Scorpion Cross Mount 30mm
The Scorpion 30mm Cross Mount is designed to fit the back of the 30mm Scorpion motors and provide a method on mounting the motor to a model's firewall.
In Stock -
Price: $1.95
|
| |
|
Scorpion Cross Mount 40mm
The Scorpion 40mm Cross Mount is designed to fit the back of the 30mm and 40mm Scorpion motors and provides a method of mounting the motor to a model's firewall.
In Stock -
Price: $3.95
|
|
Scorpion Motor Bearing Kit for HK-2221 V1
In order to keep your motor in top running condition, you need a good set of bearings. Occasionally, after a crash or landing in the dirt, the bearings can become damaged and need to be replaced.
Out of Stock -
Price: $2.49
|
| |
|
Scorpion Motor Bearing Kit for HK-2221 V2
In order to keep your motor in top running condition, you need a good set of bearings. Occasionally, after a crash or landing in the dirt, the bearings can become damaged and need to be replaced.
In Stock -
Price: $2.49
|
|
Scorpion Motor Bearing Kit for HK-3026
In order to keep your motor in top running condition, you need a good set of bearings. Occasionally, after a crash or landing in the dirt, the bearings can become damaged and need to be replaced.
In Stock -
Price: $3.95
|
| |
|
Scorpion Motor Bearing Kit for HK-40mm
In order to keep your motor in top running condition, you need a good set of bearings. Occasionally, after a crash or landing in the dirt, the bearings can become damaged and need to be replaced.
In Stock -
Price: $5.95
|
|
Scorpion Motor Bearing Kit for S-22mm
In order to keep your motor in top running condition, you need a good set of bearings. Occasionally, after a crash or landing in the dirt, the bearings can become damaged and need to be replaced.
In Stock -
Price: $2.49
|
| |
|
Scorpion Motor Bearing Kit for S-30mm
In order to keep your motor in top running condition, you need a good set of bearings. Occasionally, after a crash or landing in the dirt, the bearings can become damaged and need to be replaced.
In Stock -
Price: $3.95
|
|
Scorpion Motor Bearing Kit for S-40mm
In order to keep your motor in top running condition, you need a good set of bearings. Occasionally, after a crash or landing in the dirt, the bearings can become damaged and need to be replaced.
In Stock -
Price: $5.95
|
| |
|
Scorpion Motor Bearing Lubrication Kit
To keep your brushless motor operating at maximum performance, it is important that the bearings in your motor be properly maintained. This is especially true of helicopter motors that often spin in excess of 45,000 RPM.
In Stock -
Price: $4.95
|
|
Scorpion Motor Shaft Kit for 2205
The Scorpion 22mm series of motors are built with 3mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the 22mm Scorpion Motors.
In Stock -
Price: $2.49
|
| |
|
Scorpion Motor Shaft Kit for 2208
The Scorpion 22mm series of motors are built with 3mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the 22mm Scorpion Motors.
In Stock -
Price: $2.49
|
|
Scorpion Motor Shaft Kit for 2212
The Scorpion 22mm series of motors are built with 3mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the 22mm Scorpion Motors.
In Stock -
Price: $2.49
|
| |
|
Scorpion Motor Shaft Kit for 2215
The Scorpion 22mm series of motors are built with 3mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the 22mm Scorpion Motors.
In Stock -
Price: $2.49
|
|
Scorpion Motor Shaft Kit for 3008
The Scorpion 30mm series of motors are built with 5mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the 30mm Scorpion Motors.
In Stock -
Price: $3.95
|
| |
|
Scorpion Motor Shaft Kit for 3014
The Scorpion 30mm series of motors are built with 5mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the 30mm Scorpion Motors.
In Stock -
Price: $4.25
|
|
Scorpion Motor Shaft Kit for 3020
The Scorpion 30mm series of motors are built with 5mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the 30mm Scorpion Motors.
In Stock -
Price: $4.95
|
| |
|
Scorpion Motor Shaft Kit for 3026
The Scorpion 30mm series of motors are built with 5mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the 30mm Scorpion Motors.
In Stock -
Price: $5.45
|
|
Scorpion Motor Shaft Kit for 3032
The Scorpion 30mm series of motors are built with 5mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the 30mm Scorpion Motors.
In Stock -
Price: $5.95
|
| |
|
Scorpion Motor Shaft Kit for 4020
The Scorpion 40mm series of motors are built with 6mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the 40mm Scorpion Motors.
In Stock -
Price: $6.49
|
|
Scorpion Motor Shaft Kit for 4025
The Scorpion 40mm series of motors are built with 6mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the 40mm Scorpion Motors.
In Stock -
Price: $6.95
|
| |
|
Scorpion Motor Shaft Kit for HK-2208
The Scorpion HK-22mm series of motors are built with 3mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the HK-22mm Scorpion Motors.
In Stock -
Price: $2.49
|
|
Scorpion Motor Shaft Kit for HK-2213
The Scorpion HK-22mm series of motors are built with 3mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the HK-22mm Scorpion Motors.
In Stock -
Price: $2.49
|
| |
|
Scorpion Motor Shaft Kit for HK-2216
The Scorpion HK-22mm series of motors are built with 3mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the HK-22mm Scorpion Motors.
In Stock -
Price: $2.49
|
|
Scorpion Motor Shaft Kit for HK-2221
The Scorpion HK-2221 motors are built with 4mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the HK-22mm Scorpion Motors.
In Stock -
Price: $3.49
|
| |
| |
