|
Connectors & Cables:Charger Accessories
|
|
AA Battery Holder - 4 Cell with BEC plug
Holds 4 AA cells in a square pack for 4.8v. Includes a BEC plug already installed. Use for radio system power on board airplanes or in other projects. This can also be used in conjunction with a BEC charge harness for charging AA batteries on your charger.
In Stock -
Price: $3.95
|
|
AA Battery Holder - 8 Cell
Holds 8 AA cells in a square pack for 9.6v. Use for transmitters or other projects. This holder has a 9-volt type plug on one end where you can install a connector if needed.
In Stock -
Price: $3.95
|
| |
|
Alligator clips - large (2R, 2B)
Large alligator clips. Package includes two sets with 2 red and 2 black clips.
In Stock -
Price: $2.95
|
|
Alligator clips - small (2R, 2B)
Small alligator clips. Package includes two sets with 2 red and 2 black clips.
In Stock -
Price: $2.49
|
| |
|
Alligator Clips with 4mm Banana Plug - 6 pcs
Stainless steel with plastic coated ends. Teeth cleanly cut and fit without overlap. A 4mm banana plug can be inserted in the handles.
In Stock -
Price: $1.95
|
|
Balance Adapter for 2-6S EH to 6-cell XH
This charge adapter allows you to plug a battery that uses an EH style balance connector into a charger such as one made by IMax, GT Power, Common Sense RC, DN power or others that use the standard JST XH style balance port.
In Stock -
Price: $6.95
|
| |
|
Balance Adapter for 2-6S HP/PQ to 6-cell XH
This charge adapter allows you to plug a Hyperion or PolyQuest battery balance connector into a charger such as one made by IMax, GT Power, Common Sense RC, DN power or others that use the standard JST XH style balance port.
Out of Stock - Price: $6.95
|
|
Balance Adapter for 2-6S TP to 6-cell XH
This charge adapter allows you to plug a Thunder Power or Flight Power battery balance connector into a charger such as one made by IMax, GT Power, Common Sense RC, DN power or others that use the standard JST XH style balance port.
Out of Stock - Price: $6.95
|
| |
|
Balance Adapter for 2-6S XH to 6-cell TP
This charge adapter allows you to plug a battery that uses a standard JST XH balance connector into a THunder Power style battery charger.
In Stock -
Price: $6.95
|
|
Banana Plugs - 2 sets
Banana Plugs - 2 red, 2 black
In Stock -
Price: $1.95
|
| |
|
Banana Receptacle - 2 sets
Banana Receptacle 2 red, 2 black
In Stock -
Price: $3.95
|
|
Battery Buddies 6 pack
Battery Buddies are color coded vinyl caps that fit on popular Deans Ultra T-style electrical connectors. They come in two colors to help you keep track of which batteries are ready to use and which need a recharge while also protecting it from short circuits.
In Stock -
Price: $4.95
|
| |
|
Charge Harness for Anderson Power Poles
Banana plugs on one end with Anderson Power Pole connectors on the other end.
In Stock -
Price: $5.95
|
|
Charge Harness for Banana Plugs
Banana plugs on one end with banana connectors on the other end.
In Stock -
Price: $4.95
|
| |
|
Charge Harness for Deans
Charge harness with banana plugs one on end and a male Deans Ultra plug on the other.
In Stock -
Price: $5.95
|
|
Charge Harness for EC3
Charge harness with banana plugs one on end and a male EC3 plug on the other.
In Stock -
Price: $3.95
|
| |
|
Charge Harness for Futaba Rx
Banana plugs on one end with Futaba-style receiver battery connector on the other end.
In Stock -
Price: $4.95
|
|
Charge Harness for Futaba Rx/Tx
Banana plugs on one end with Futaba-style receiver and transmitter connectors on the other end.
In Stock -
Price: $7.95
|
| |
|
Charge Harness for Glow Starters
Banana plugs on one end with glow starter connector on the other end.
In Stock -
Price: $5.95
|
|
Charge Harness for Hitec Rx/Tx
Banana plugs on one end with Hitec-style receiver and transmitter connectors on the other end.
In Stock -
Price: $7.95
|
| |
|
|
Charge Harness for Hitec/JR Rx
Banana plugs on one end with Hitec/JR-style receiver battery connector on the other end.
In Stock -
Price: $4.95
|
|
Charge Harness for Hyperion LiFePo Packs
Hi-Rate Charge Cable for G3 LiFePO4 Radio Packs
In Stock -
Price: $3.95
|
| |
|
|
Charge Harness for JR/Spektrum Rx/Tx
Banana plugs on one end with JR-style receiver and transmitter connectors on the other end.
In Stock -
Price: $7.95
|
|
Charge Harness for JST/BEC
Charge Harness for BEC or JST connectors.
In Stock -
Price: $4.95
|
| |
|
Charge Harness for Tamiya Plugs
Charge Harness for TAMIYA Plug. May be used with Hyperion CLASSIC Car Packs, or any pack which has a standard Tamiya connector.
In Stock -
Price: $3.95
|
|
Charge Harness for Transmitters
Universal charge harness for most transmitters. Has banana plugs on one end and 3 different transmitter charger jack plugs on the other.
In Stock -
Price: $5.95
|
| |
|
EC3 to Tamiya Adapter
Converts a Tamiya male plug to a EC3 male plug. Female Tamiya on one end and Male EC3 on the other.
In Stock -
Price: $3.95
|
|
Electrical Clip Kit
Repair broken leads on test equipment and chargers or make your own low-voltage jumper leads. Spring clips have PVC insulation and there are equal numbers of black and red.
In Stock -
Price: $5.95
|
| |
|
Hyperion 6 Port Parallel Charge Adapter for 1S Lipo
Six-port parallel charge adapter for 1S LiPo as used in Eflite UltraMicro and Kyosho Minium series models. Fits compatible battery brands also, such as the Hyperion CX130-UM. Includes gold 4mm connectors to charger output.
In Stock -
Price: $7.95
|
|
Hyperion Charge Harness for 2S Car Packs
EOS Output Harness for Balance Charging 2S Car Packs such as ORION, TRAKPOWER and CHECKPOINT. Fits EOS balance chargers EOS0403i, 0606i-x, 0610i-x) and LBA10 balancer.
In Stock -
Price: $6.95
|
| |
| |
