Found 21 product(s) for Gyros & Stabilizers (1-21 of 21)

Gyros & Stabilizers
	Align PU Adhesive Gel PU adhesive gel is a material that possess excellent vibration dampening characteristics, ideal for mounting gyroscopes, receivers, or other electronics in vibration prone areas.  The PU adhesive gel is an ideal replacement for traditional gyro foam tape.  It also comes with two Align hook and loop straps. In Stock - Price: $8.95		DJI Naza Multi-Rotor Flight Controller NAZA is a lightweight multi-axis control platform specially designed for aeromodel hobbyists. It is a smalled all-in-one module includes controller, gyroscope, accelerometer and barometer. It has D-Bus support, upgrade support, and extendible port. In Stock - Price: $230.00
	DJI WooKong-M Multi-Rotor Flight Controller DJI Wookong Multi-Rotor stabilization controller is a complete flight system for all multi-rotor platforms for commercial and industrial AP applications. WK-M utilizes high quality components precisely calibrated with temperature compensation in all gyros and sensors, industry renounce flight algorithm in autopilot and UAV. In Stock - Price: $1,139.00		Fyetech AP-117 OSD Module with Current Sensor The Fyetech AP-117 On Screen Display Module will work with many of the Fyetech products to display your flight data over your video.  This data can be essential for FPV and UAV applications where you need to know things like where you are at, which way is home, and how much battery you have left.   In Stock - Price: $138.95
	Fyetech FY-30A Sun Stabilizer System FY-30A is an inertial attitude measurement instrument used for automated stabilization of fixed wing model aircrafts and two axis camera gimbals. In Stock - Price: $124.95		Fyetech FY-90Q Pro Gyro/Stabilizer System The FY-90Q Pro all-in-one 3-axis multi-rotor controller works in both + and X mode and is firmware upgradable.  This new Pro version not only adds these new capabilities but also further improves the stability and manueverablility.   In Stock - Price: $127.95
	FyeTech FY-90Q Replacement Multi-Connector This is a replacement multi-connector harness for the FY-90Q quad controller. In Stock - Price: $3.95		FyeTech FY-90Q/20A Replacement Mount This is a vibration dampening mount for the FyeTech 90Q or 20A flight stabilzers.  This can be used with other flight stabilizers or gyros where vibration dampening is needed. In Stock - Price: $5.95
	Fyetech FY-91Q Basic - Controller Only The Fyetech FY-91Q Basic includes the FY-91Q multi-rotor controller only and can be later upgraded with the optional compass and GPS module for position hold and return-to-home functions.  The FY-91Q can fly Quad, Y6, or Hex multi-rotor configurations.  In Stock - Price: $214.95		Fyetech FY-91Q Compass & GPS Module Only This is the optional FY-91Q GPS and Compass module that can be added to the FY-91Q to provide functions like position hold and retunr to home.  It include the GPS/compass module with wiring only. In Stock - Price: $184.95
	Fyetech FY-91Q Navigation Edition with Compass & GPS The Fyetech FY-91Q Navigation Edition includes the optional compass and GPS module for a very complete multi-rotor controller that can fly Quad, Y6, or Hex multi-rotor configurations with position hold and return-to-home functions.  Also works with optional AP117 OSD to display full on-screen navigation and flight parameters.    In Stock - Price: $399.95		Fyetech TTL-USB Cable for PID Settings This is the cable needed to modify the PID settings on the Fyetech FY-90Q quad controller.  In Stock - Price: $12.95
	Gaui 330X GU-344 Quad Flyer 3-Axis Gyro The Gaui GU-344 Quad Flyer 3-Axis gryro can be used as a replacement or the start of a new scratch-built quad.  Works in cross or plus setups with hover and cruise modes.   Adjustable gain control on unit or by remote. Out of Stock - Price: $214.95		OpenPilot CopterControl Flight Controller CopterControl from the OpenPilot project introduces a new generation of multi-purpose aircraft stabilization platforms. The CopterControl system aims to be a game-changing entry in the leisure and hobby markets, as well as being a robust base for many commercial and research projects.  The board shares a lot with the Pro/INS platform, including the powerful OpenPilot architecture and the cross-platform Ground Control Station (GCS). Out of Stock - Price: $89.95
	Quadrino Basic - Multi-Rotor Flight Controller The Quadrino Basic Flight Controller is a ready-to-fly alternative to the complicated process of gathering the many separate pieces required to make a MultiWii multi-copter. The flight characterstics of the MutliWii system are very good. Aerobatic flight such as loops, rolls, etc, are fast and predictable. Autolevel mode works very well for FPV. In Stock - Price: $109.95		Quadrino Cable Set for Zoom and Basic This Universal 3-piece cable set is designed to connect the Quadrino Zoom or Basic flight controller board to any brand of radio receiver. The cables are made with 3-pin connectors where needed, and the rest of the connectors are the single pin style that allow swapping the order of channels as needed to fit virtually any model radio receiver. In Stock - Price: $6.95
	Quadrino Zoom - Multi-Rotor Flight Controller The Quadrino Zoom Flight Controller is a ready-to-fly alternative to the complicated process of gathering the many separate pieces required to make a MultiWii multi-rotorcopter. The flight characterstics of the MutliWii system are very very good. Aerobatic flight such as loops, rolls, etc, are fast and predictable. In Stock - Price: $129.95		Quadrino Zoom - Multi-Rotor Flight Controller V2 The Quadrino Zoom Flight Controller is a ready-to-fly alternative to the complicated process of gathering the many separate pieces required to make a MultiWii multi-rotorcopter. The flight characterstics of the MutliWii system are very very good. Aerobatic flight such as loops, rolls, etc, are fast and predictable.  New V2 Rev 1E board with improved altitude hold and quick connects. In Stock - Price: $149.95
	Spartan RC Mini Gyro Pads The pack includes a quantity of 10pcs 22x22x3mm and 5pcs 20x20x1mm pads.  These can be used with any gyro to eliminate vibration. In Stock - Price: $7.95		USB Programming Cable - 3 Foot If you do not already have a USB programming cable for your CopterControl or Quadrino board, you will need to get one of these to be able to connect the board to your PC and use the GCS software interface. This cable measures 3 feet long, and has a standard USB A style Male connector on one end, to fit into your Computer or Laptop, and a 5-pin Mini-USB connector at the other end that fits the USB port on the CopterControl or Quadrino board. In Stock - Price: $3.95
	USB Programming Cable - 6 Foot If you do not already have a USB programming cable for your CopterControl or Quadrino board, you will need to get one of these to be able to connect the board to your PC and use the GCS software interface. This cable measures 6 feet long, and has a standard USB A style Male connector on one end, to fit into your Computer or Laptop, and a 5-pin Mini-USB connector at the other end that fits the USB port on the CopterControl or Quadrino board. In Stock - Price: $4.95