|
Prop Adapters
|
|
Hyperion Bullet Safety Nut M5
Hyperion Bullet Safety Nut M5. Fits Scorpion 22mm series threaded prop adapters and others that have a 5mm threaded shaft.
In Stock -
Price: $2.95
|
|
Hyperion Bullet Safety Nut M6
Bullet Safety Nut to fit prop adapters with a M6 threaded shaft.
In Stock -
Price: $3.95
|
| |
|
Hyperion Collet Puller for M5 and M6 Adapters
The easy and safe way to remove those stubborn collet adapters without damaging your motor.
In Stock -
Price: $12.95
|
|
Hyperion Collet Puller for M8 Adapters
The easy and safe way to remove those stubborn collet adapters without damaging your motor.
In Stock -
Price: $14.95
|
| |
|
Hyperion Extra Long Prop Adapter - 3.2mm
Hyperion Extra Long 3.2mm Collet Prop Adapter with M5 threaded shaft. Beautifully made, precise collet prop adapter from Hyperion, at a reasonable price. These Extra-Long adapters are the best choice when mounting APC E Props with backplate spinners.
In Stock -
Price: $3.95
|
|
Hyperion Extra Long Prop Adapter - 3mm
Hyperion Extra Long 3mm Collet Prop Adapter with M5 threaded shaft. Beautifully made, precise collet prop adapter from Hyperion, at a reasonable price. These Extra-Long adapters are the best choice when mounting APC E Props with backplate spinners.
In Stock -
Price: $3.95
|
| |
|
Hyperion Extra Long Prop Adapter - 4mm
Beautifully made, precise collet prop adapter from Hyperion, at a reasonable price. Made to fit 4mm motor and gearbox shafts, with suffcient length to mount large APC E props and also a spinner if desired.
In Stock -
Price: $4.49
|
|
Hyperion Extra Long Prop Adapter - 5mm
Hyperion Extra Long 5mm Collet Prop Adapter with M8 threaded shaft. Beautifully made, precise collet prop adapter from Hyperion, at a reasonable price. These Extra-Long adapters are the best choice when mounting APC E Props with backplate spinners. 3mm hole in end of adapter allows mounting of various aluminum spinners.
In Stock -
Price: $8.95
|
| |
|
Hyperion Extra Long Prop Adapter - 5mm with M6 Shaft
Extra long collet prop adapter made to fit 5 mm motor and gearbox shafts, with suffcient length to mount large APC E props and also a spinner if desired.
In Stock -
Price: $4.95
|
|
Hyperion Extra Long Prop Adapter - 6mm
Hyperion Extra Long 6mm Collet Prop Adapter with M8 threaded shaft. Beautifully made, precise collet prop adapter from Hyperion, at a reasonable price. These Extra-Long adapters are the best choice when mounting APC E Props with backplate spinners.
In Stock -
Price: $8.95
|
| |
|
Hyperion Long Prop Adapter - 3.2mm
Hyperion Long 3.2 mm Collet Prop Adpadter with M5 threaded shaft. Beautifully made, precise collet prop adapter from Hyperion, at a reasonable price. Made to fit 3.2mm motor shafts.
In Stock -
Price: $3.95
|
|
Hyperion Long Prop Adapter - 3mm
Hyperion Long 3mm Collet Prop Adapter with M5 threaded shaft. Beautifully made, precise collet prop adapter from Hyperion, at a reasonable price. Made to fit 3mm motor and gearbox shafts, with sufficient length to mount APC E props and also a spinner if desired.
In Stock -
Price: $3.95
|
| |
|
Hyperion Long Prop Adapter - 5mm
Hyperion LONG 5mm Collet Prop Adapter with M8 threaded shaft. Beautifully made, precise collet prop adapter from Hyperion, at a reasonable price.
In Stock -
Price: $7.95
|
|
Hyperion Long Prop Adapter - 5mm with M6 Shaft
Long prop adapter for EP planes fits a 5mm motor shaft and has a M6 (6mm) threaded prop shaft.
In Stock -
Price: $4.95
|
| |
|
Hyperion O-Ring for Prop Saver
Hyperion O-Ring for Prop Saver 10 pcs.
Out of Stock - Price: $2.45
|
|
MPI Prop Adapter - 1/8"
Prop adapter fits 1/8" shaft motors and props with 1/4" hub. Recommended for larger brushless outrunner motors and gearboxes.
In Stock -
Price: $5.95
|
| |
|
MPI Prop Adapter - 2.3mm
Prop adapter fits 2.3mm shaft motors and props with 3/16" hub. Recommended for Speed 400 motors
In Stock -
Price: $4.95
|
|
MPI Prop Adapter - 2mm
Prop adapter for 2mm shaft motors. Fits 3, 4, and 5.5mm prop hubs
In Stock -
Price: $4.95
|
| |
|
MPI Prop Adapter - 3mm
Prop adapter fits 3mm shaft motors and props with 3/16" hub. Recommended for Speed 400 motors
In Stock -
Price: $4.95
|
|
MPI Prop Adapter - 4mm
Prop adapter fits 4mm shaft motors and props with 6mm hub.
In Stock -
Price: $4.95
|
| |
|
|
MPI Prop Adapter - 5/32"
Prop adapter fits 5/32" shaft motors and props with 1/4" hub. Recommended for Cobalt 05, 15, 20 motors
In Stock -
Price: $5.95
|
|
MPI Prop Adapter - 5mm
Prop adapter fits 5mm shaft motors and props with 8mm hub. Recommended for larger brushless outrunner motors and gearboxes.
In Stock -
Price: $7.95
|
| |
|
Scorpion 3mm Prop-Saver Adapter
This Prop-Saver Adapter is the same one that is included with 2205, 2208 and 2212 series Scorpion Brushless motors. Machined from High-Quality Aluminum bar stock, it is designed to fit on a 3mm motor shaft, and comes packaged with 2 replacement rubber O-rings.
In Stock -
Price: $2.95
|
|
Scorpion O-Ring 10-pack
These O-Rings are the exact replacements for the ones that are included with the Scorpion 22mm airplane motors, and the Scorpion 3mm Prop Saver Adapters. You get 10 O-rings in this package, so you always have a spare at the flying field.
In Stock -
Price: $2.49
|
| |
|
Scorpion Threaded Prop Adapter - 3.17mm
This Threaded Prop Adapter is the same style as the one that is included with the HK 22mm series Scorpion Brushless motors. This collet adapter is designed to fit a 3.17mm or 1/8" motor shaft.
In Stock -
Price: $8.95
|
|
Scorpion Threaded Prop Adapter - 3mm
For 3mm shaft motors. Has a 5mm threaded prop shaft.
In Stock -
Price: $8.95
|
| |
|
Scorpion Threaded Prop Adapter - 5mm
Fits 5mm motor shaft, and has a 6mm threaded prop shaft.
In Stock -
Price: $10.95
|
|
Scorpion Threaded Prop Adapter - 5mm with 48mm thread
This prop adapter was designed to be used on the Scorpion 30mm series motors, or any other motor with a 5mm shaft diameter. These prop adapters have an extra long shaft that measures 48mm total length, with 37mm of shaft forward from the prop back plate.
In Stock -
Price: $11.45
|
| |
|
Scorpion Threaded Prop Adapter - 6mm
This Threaded Prop Adapter is the same one that is included with 4020, and 4025 series Scorpion Brushless motors. Machined from High-Quality Aluminum bar stock, it is designed to fit on a 6mm motor shaft, and has a 8mm threaded prop shaft.
In Stock -
Price: $12.95
|
|
Scorpion Threaded Prop Adapter - 8mm
This Threaded Prop Adapter is the same one that is included with S-4035 series Scorpion Brushless motors. Machined from High-Quality Aluminum bar stock, it is designed to fit on an 8mm motor shaft, and has a 8mm threaded prop shaft.
In Stock -
Price: $13.95
|
| |
|
Spinner Nose Prop Adapter - 2.3mm
This threaded prop adapter is designed to fit any motor with a 2.3mm output shaft. The prop shaft measures 5mm in diameter, and will hold props with hubs ranging from 4mm to 8mm thick.
In Stock -
Price: $2.95
|
|
Spinner Nose Prop Adapter - 3.17mm
This threaded prop adapter is designed to fit any motor with a 3.0mm output shaft. The prop shaft measures 5mm in diameter, and will hold props with hubs ranging from 3mm to 8mm thick.
In Stock -
Price: $2.95
|
| |
| |
