Join our mailing list!






Home > Chargers
Choose a sub category:
Chargers Charger Accessories Power Supplies
If you fly radio control electric aircraft you're going to need a good charger. We carry some of the highest quality chargers on the market from Hyperion, Graupner, Hitec and others. Most chargers we carry will charge any battery you may encounter in the RC hobby and most are firmware upgradeable so they never become obsolete. A typical charger will handle LiPo, LiFe, A123, NiMh, NiCd, and Pb batteries and have a built in balancer to keep your batteries healthy. Power ranges from 50 watts to 1000+ watts. While most chargers run on 12v to 24v there are also AC/DC models available.
Sort By:
Page of 2
CellMeter-8 Battery and Servo Tester Charge Harness for Anderson Power Poles Charge Harness for Banana Plugs
CellMeter-8 Battery and Servo Tester
Our Price: $13.95
In Stock
Charge Harness for Banana Plugs
Our Price: $4.95
In Stock
The CellMeter-8 is a multi-function device that can measure the voltage of Li-Po, Li-Ion, Li-Fe, Ni-Cad or Ni-Mh batteries, as well as test the operation of servos. This updated version also features an LED backlight for easy viewing in low-light conditions, as well as battery discharge and balance functions. Banana plugs on one end with Anderson Power Pole connectors on the other end.
Banana plugs on one end with banana connectors on the other end. Sometimes you just need a jumper set.
Charge Harness for Deans- Charge Harness for EC3 Charge Harness for Futaba Rx
Charge Harness for Deans-
Our Price: $5.95
In Stock
Charge Harness for EC3
Our Price: $3.95
In Stock
Charge Harness for Futaba Rx
Our Price: $4.95
In Stock
Charge harness with banana plugs one on end and a male Deans Ultra plug on the other.
Charge harness with banana plugs one on end and a male EC3 plug on the other.
Banana plugs on one end with Futaba-style receiver battery connector on the other end. Use this harness to charger your receiver batteries.
Charge Harness for Futaba Rx/Tx Charge Harness for Hitec Rx/Tx Charge Harness for Hitec/JR Rx
Charge Harness for Futaba Rx/Tx
Our Price: $7.95
In Stock
Charge Harness for Hitec Rx/Tx
Our Price: $7.95
In Stock
Charge Harness for Hitec/JR Rx
Our Price: $4.95
In Stock
Banana plugs on one end with Futaba-style receiver and transmitter connectors on the other end.
Banana plugs on one end with Futaba-style receiver and transmitter connectors on the other end. Use these two charge harnesses to charge your Hitec transmitter and receiver batteries.
Banana plugs on one end with Hitec/JR-style receiver battery connector on the other end. Use this harness to charge your receiver battery.
Charge Harness for JR/Spektrum Rx/Tx Charge Harness for JST/BEC Charge Harness for Tamiya Plugs
Charge Harness for JR/Spektrum Rx/Tx
Our Price: $7.95
In Stock
Charge Harness for JST/BEC
Our Price: $4.95
In Stock
Charge Harness for Tamiya Plugs
Our Price: $3.95
In Stock
Banana plugs on one end with JR-style receiver and transmitter connectors on the other end. Use these two charge harnesses to charge your JR transmitter and receiver batteries.
Charge Harness for BEC or JST connectors. Has banana plugs on one end and a JST connector on the other.
Charge Harness for TAMIYA Plug. May be used with Hyperion CLASSIC Car Packs, or any pack which has a standard Tamiya connector
Charge Harness for Transmitters Hyperion UMX Type 2S Unbalanced Charging Cable Charge Harness for XT30
Charge Harness for Transmitters
Our Price: $5.95
In Stock
Charge Harness for XT30
Our Price: $3.95
In Stock
Universal charge harness for most transmitters. Has banana plugs on one end and 3 different transmitter charger jack plugs on the other.
Unbalanced UMX charge cable with 4mm banana jacks for any charger.
Banana plugs on one end with an XT30 connector on the other end to match your batteries.
Charge Harness for XT60 Hyperion XT90 Charge Harness Chargery 33A 0-18v 600 watt DC Power Supply
Charge Harness for XT60
Our Price: $7.49
In Stock
Charge Harness for XT90
Our Price: $5.95
In Stock
Chargery 33A 0-18v 600 watt DC Power Supply
Our Price: $119.00
(Out of Stock)
Banana plugs on one end with an XT60 connector on the other end to match your batteries.
This is a XT90 charge harness for charging batteries with the XT90 plug. It has standard 4mm banana jacks on one end and a male XT90 connector on the other and will fit most chargers.
The Chargery S600 features High efficiency and Smaller size. Active PFC makes lower input current, save energy and more reliable. High PF improves the energy consumption from main power grid.
Chargery 60A 10-25v 1500 watt DC Power Supply Hyperion 6-Port Charge Adapter for MCPX Packs Hyperion 6-Port Parallel Charge Adapter for 1S Lipo
Chargery 60A 10-25v 1500 watt DC Power Supply
Our Price: $300.00
(Out of Stock)
The Chargery S1500 features High efficiency and Smaller size than other similar chargers. Active PFC makes lower input current, save energy and more reliable. High PF improves the energy consumption from main power grid. 1500 watts of power, adjustable output from 10v up to 25v, and an LCD display.
This parallel charge board allows you to charge up to 6 lipos with MCPX connectors at a time which saves you charging time.
Six-port parallel charge adapter for 1S LiPo Fits compatible battery brands such as the Hyperion CX130-UM. Includes gold 4mm connectors to charger output.
Hyperion Charge Harness for 2S Car Packs Hyperion Charger Output Wire Set Hyperion EOS 0720i Super Duo III Balancing Charger
Hyperion Charger Output Wire Set
Our Price: $3.95
In Stock
EOS Output Harness for Balance Charging 2S Car Packs such as ORION, TRAKPOWER and CHECKPOINT. Fits EOS balance chargers EOS0403i, 0606i-x, 0610i-x) and LBA10 balancer. Output wire set for any charger which uses 4mm sockets, such as EOS 5i, EOS 7i, Schultze, and most other high-quality chargers on the market 1000 watt dual output balancing charger for 1-7S LiPo, LiFe, NiMh, NiCd, Pb.  Firmware upgradable and interfaces with your PC for the ultimate control.
Hyperion EOS 0840i 8S DC Balancing Charger Hyperion EOS 0720i Net 3 AC/DC Balance Charger Hyperion EOS Sentry V3 Battery Checker with Balancing and Store Mode
The EOS0840i is a 1000 watt charger that can charge up to 8S Lithium batteries with a maximum current of 40A. The EOS0840i is compatible with HvLi batteries, meaning now your capable of charging the next generation of G6 HvLi 4.35V Batteries. Hyperion EOS 0720i NET3 7S 16N CHARGER AC/DC with USA Power Cord, Integrated balancer, TCS & STORE MODE, 20A Max with 90W (AC) or 150W (DC) charger power.
Hyperion's best selling battery checker is now a version 3 which supports HvLi batteries as well as standard LiPo, NiMh, and NiCd batteries. The new V3 also supports 1-8 cell batteries, balances your packs, and even has a storage mode.
Hyperion Harness for 0606i Chargers Hyperion Harness for 0610i Chargers Hyperion LBA10 Balancer Dataport Cable
Hyperion Harness for 0606i Chargers
Our Price: $2.95
In Stock
Hyperion Harness for 0610i Chargers
Our Price: $1.95
In Stock
Harness to fit between HP-TI-PRGUSB USB-to-Serial Adapter and EOS0606i Series Chargers, for PC Connections. Harness to fit between HP-TI-PRGUSB USB-to-Serial Adapter and EOS0606i Series Chargers, for PC Connections. DataPort Cable for connecting LBA10 Balancer to compatible Hyperion Chargers, in order to view individual cell voltages during the charge process
   
 
Sign Up For Our Newsletter