Join our mailing list!

  Home > Brushless Motors >

Cobra C-2217/20 960Kv Brushless Motor
Cobra C-2217/20 960Kv Brushless Motor

Alternative Views:

Our Price: $31.95

Stock Status:In Stock

Product Code: C-2217-20

Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

The Cobra 2217 series motors have a 1/8 inch (3.17mm) shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

Included with every Cobra 2217 Series Motor is a complete accessory package which contains the following items:

● Heavy Duty 3mm Thick Cross Style Motor Mount
● Four M3x6mm Motor Mount Screws
● Bolt-On style theaded prop adapter with 3 screws
● Retaining Collar with Set Screw
● Three female 3.5mm bullet connectors
● Three pieces of heat-shrink tubing

Click here for the Cobra C-2217/20 Propeller Data Chart

Cobra 2217-20 Motor Specifications
Stator Diameter 22.0 mm (0.866 in)
Stator Thickness 17.0 mm (0.669 in)
Number of Stator Slots 12
Number of Magnet Poles 14
Motor Wind 20 Turn Delta
Motor Kv Value 960 RPM per Volt
No Load Current (Io) 0.55 Amps @ 8 Volts
Motor Resistance (Rm) per Phase 0.165 Ohms
Motor Resistance (Rm) Phase to Phase 0.110 Ohms
Maximum Continuous Current 20 Amps
Max Continuous Power (2-cell Li-Po) 150 Watts
Max Continuous Power (3-cell Li-Po) 220 Watts
Motor Weight 72.0 grams (2.54 oz.)
Outside Diameter 27.7 mm (1.091 in.)
Shaft Diameter 3.17 mm (0.125 in.)
Motor Body Length 33.0 mm (1.299 in.)
Overall Shaft Length 47.0 mm (1.850 in.)
Motor Timing 5-10 degrees
PWM Frequency 8 KHz

Share your knowledge of this product. Be the first to write a review »
Sign Up For Our Newsletter